PENNAR ELF AC 13S

Home

Products

Prices

Order

Contact

PENNAR ELF AC 13S

COMBUSTION OILS IMPROVER FOR HEAVY FUEL OILS

HEAVY FUEL OILS : LDO / CBFS / FO / LSHS

FUNCTIONS:

It is an Organo-metallic compound in solution in an aromatic solvent which is readily soluble in fuel and which acts as a combustion catalyst by increasing the speed of oxidation of unburnt hydrocarbons during the process of heavy fuel oil combustion.

PENNAR ELF AC 13S is a flexible way to optimize the use of heavy fuel oils and exhibits the following main properties :

Reduces significantly the amount of soot and unburnt hydrocarbons (more than 50 %) formed during the combustion of heavy fuel oils
Allows to reduce the excess air used during the combustion process.
Improves the flame homogeneity and allows to achieve a more stable yield of combustion along the time
Reduces deposits on heat transfer surfaces and consequently allows to achieve a more efficient heat transfer in the convection zone
As a consequence , reduction in fuel consumption is achieved.

ENVIRONMENT :

Reduces the unburnt solids by at least 50 %
Decreases emission of Black smoke & Co. Gas
Reduces NOx by at least 30 %
Satisfies environmental considerations

RECOMMENDED DOSAGE :

Between 300 to 500 ppm depending on the nature of the fuel.

*CHARACTERISTICS*	*TYPICAL*
Appearance	Reddish Brown Liquid
Density at 15' C	0.985 kg / lit. typical
Pour Point	Minus 3'C maximum
Flash Point	66'C minimum
Viscosity at 20'C	30 cst max.
Neutral , non -toxic	30 cst max.

HANDLING And BLENDING :

Pennar ELF AC 13S must be stored and handled at ambient temperatures not lower than minus 3'C. Carbon Steel , stainless steel , poly ethylene , polypropylene or Teflon may be used for construction of storage.

The recommended blending method is either by direct injection in the fuel line by a dosing pump or by addition into the fuel storage tank or in the tanker before decantation of the fuel

PRECAUTION :

It is poses no special hazards for personnel , but as with all petroleum products , avoid skin and eye contact and inhalation of vapours

CERTIFICATION :

Tested , evaluated and certified by International Flame Research Foundation , Holland and National Analytical Laboratory , France and by several industrial users in boilers and furnaces.

||Home|| ||Order|| ||Chemicals|| ||Contact us||